Physis Piano K4 User Manual page 49

FREE SPACE: free space on the internal memory.
Press [EXIT] or [F3] to go back to the previous page.
Each time an update is release (.kpu file), it will be made available on the web page
After downloading the file, save it to the root folder of a USB pen.
To install the update, insert the USB key in one of the USB connectors [HOST 1-2] or [HOST 3-4] on the rear panel. Wait for
a pop-up message (USB HOST PLUGIN NOTIFICATION) then press [F4]. The system now checks if a valid update file is
saved on your USB pen. After a short while, the following message appears:
The window shows the update file that has been found on the USB pen (the version is the number after the "v" character),
and asks to confirm. Press [ENTER] or [F4] to confirm and install the update, or [EXIT] or [F4] to abort the operation. While
updating, other messages will appear, indicating the system section that is currently being updated. At the end of the
procedure, a pop-up message appears, stating "Upgrade done. Please switch off and on the instrument". Follow the
instruction.
Should the update fail, an error message will appear. The error message also states the type of error occurred. For further
information on error messages, see chap. 9.1.
NB
Keep in mind that the .kpu file must be placed in the main (root) folder of the USB pen, not in subfolders. Only one
.kpu file must be present in the pen. Having more than one update files will cause errors.
BACKUP
K4 / K5 allows you to save a backup copy of all settings to a specific section of the internal memory, or to a USB pen. The
backup version can then be loaded through the RESTORE function described below. This means that you can create an
unlimited number of configurations, that can be recalled quickly, just reloading a backup file. This might prove useful in a
number of context, such as live performances, or in studio. It is as if having more than one fully configured instrument
available. "Fully configured" means that the backup file contains:
•
all Performances
•
all Chains
•
all general settings of the SYSTEM menu.
Place the cursor on the BACKUP field and press [ENTER] to access the following page (see next page):
The page looks like the one described at chapter 8.4. Therefore, to read about folders selection memory unit selection, file
saving and so on, see the aforementioned chapter.
For a description of UTILITY functions, see chap. 8.3 – Utility functions.
User Manual – General instrument settings (System Mode)
EN - 47
http://www.viscountinstruments.com
.