Physis Piano K4 User Manual page 31

-
PROG: Program Change
-
CH PRESS: Channel Pressure (channel aftertouch)
-
NOTE: note message (only for buttons)
Message MSB-LSB: this parameter is type-dependent, that is:
-
CC: Control Change number
-
NRPN e RPN: MSB and LSB number for Non Registered Parameter Number and Registered Parameter Number
-
PG: MSB and LSB numbers of Bank Select messages
PITCH and CH PRESS messages do not have this parameter.
Min or Off: minimum value, transmitted when,
•
a slider is at its lowest
•
a knob is rotated counter-clockwise
•
a button is not pressed (TOGGLE mode, see MODE parameter), with Led light off (NORMAL mode), or at first
STEP (in STEP mode)
Max or On: maximum value, transmitted when,
•
a slider is at its highest
•
a knob is rotated clockwise
•
a button is pressed (TOGGLE mode), with Led light (NORMAL mode), or at its last STEP (STEP mode)
This is how MIDI messages usually work. However, controls can be used in inverted mode, so that a MIDI messages
ha maximum value when
•
a slider is at its lowest
•
a knob is rotated counter-clockwise
•
a button is not pressed (TOGGLE mode), with Led light off (NORMAL mode), or at first STEP (in STEP mode)
To do so, set the Max parameter to a value lower than the Min parameter.
Value: starting value, transmitted when a Scene is selected, calculated according to the range set by the Min and
Max parameters. This field can be modified also by using the corresponding control. The page visualizes the current
value.
Mode: (only for BUTTONS), indicates the function mode for buttons, can be:
−
NORMAL: by standard, the value is at minimum. While pressed, the value is at its maximum;
−
TOGGLE: each time the button is pressed, the value is toggled between maximum and minimum;
−
STEP: each time the button is pressed, the value is increased or decreased by one unit.
NB
The off - on range of buttons (in STEP mode) assigned to more than one Zone is the shortest of the set ranges. For
example, if the range is set as 0-127 for a Zone and 0 - 100 for another, the actual range of the MIDI messages will be
0-100.
Name: name associated to the panel control. To enter a new name, follow the procedure described at chap. 5.2.
Press [F2] in the KNOBS page to switch to the next knob; rotating a knob automatically opens the page for that particular
knob.
Press [F3] in the SLIDERS page to switch to the next slider; moving a slider automatically opens the page for that particular
slider.
Press [F4] in the BUTTONS page to switch to the next button; pressing a button automatically opens the page for that
particular button.
Press the function buttons [F1], [F2], [F3] and [F4] to switch to a different page of the CTRL BANKS section.
Press [EXIT] to return to INFO MODE and EDIT MODE.
Press [INFO] to return to PERFORMANCE MODE if the system is currently in INFO mode. Otherwise, press [EDIT], or
press [EXIT] two times.
To access a different operating mode, press its corresponding button, in the MODE section of the front panel.
User Manual – Checking and modifying a Performance (Info and Edit Mode)
EN - 29