General Instrument Settings (System Mode); Foreword On System Mode; System Midi And Preferences - Physis Piano K4 User Manual

7. GENERAL INSTRUMENT SETTINGS
(SYSTEM MODE)

7.1 FOREWORD ON SYSTEM MODE

Pressing the [SYSTEM] button on the front panel MODE section, you can access the System MIDI settings, creation and/or
modification of Virtual Instruments, allocation of system functions to the pedals, wheel and aftertouch, and other functions
utilities including customization and upgrade the operating system of the instrument.
The first page is called SYSTEM MODE; it is a selection menu, from which the specific functions can be accessed:
All function are grouped into four section; to select a section, press the corresponding function button:
[F1]: GLOBAL section, which contains the System MIDI settings and collects the customization settings of the
instrument.
[F2]: INSTRUMENTS section, containing programming functions for Virtual Instruments.
[F3]: SETUP section, where pedals and wheels can be calibrated and assigned system functions; keyboard aftertouch
can also be calibrated here, and a remote external sequencer can be configured in this section.
[F4]: UTILITY section, containing information on the instrument; all settings and Performances can be saved and
loaded here; Factory Reset function.
Press [SYSTEM] or [EXIT] to return to PERFORMANCE MODE, or any other MODE button to access the corresponding
operating mode.

7.2 SYSTEM MIDI AND PREFERENCES

Pressing [F1] in the SYSTEM MODE screen, you have access to the following sub-menus:
Place the cursor on one of the fields and press [ENTER] to recall the corresponding functions:
MIDI COMMON: collects the Local Control setting and selection of ports and MIDI channels for receiving and sending
messages to the system.
PREFERENCES: customization functions of the instrument.
User Manual – General instrument settings (System Mode)
EN - 37