Leds For The Sfp+ Slots; Figure 5: Sfp+ Slot Leds; Table 2: Leds On The 10/100/1000Base-T Ports On The At-X510-28Gtx And At-X510-52Gtx Switches - Allied Telesis AT-x510-28GTX Installation Manual

Chapter 1: Overview
LEDs for the
SFP+ Slots
28
Table 2. LEDs on the 10/100/1000Base-T Ports on the AT-x510-28GTX
LED State
Solid Green
Flashing
Green
Link/
Activity
Solid Amber
LED
Flashing
Amber
Off
Duplex Green
Mode
Amber
LED
Flashing
Amber
The LEDs for the SFP+ slots are located between the slots, as shown in
Figure 5. Each SFP+ slot has one LED. The left-hand LED is for the top
slot and the right-hand LED is for the bottom slot.
and AT-x510-52GTX Switches
A port has established an 1000 Mbps link to
a network device.
A port is transmitting or receiving data at
1000 Mbps.
A port has established a 10 or 100 Mbps
link to a network device.
A port is transmitting or receiving data at 10
or 100 Mbps.
A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
A port is operating in full duplex mode.
A port is operating in half-duplex mode at 10
or 100 Mbps. (Half-duplex mode does not
apply to 1000 Mbps operation.)
Collisions are occurring on a port operating
at 10 or 100 Mbps.
SFP+ Slot LEDs
Figure 5. SFP+ Slot LEDs
Description