Front Wheel Inspection - Yamaha Scorpio Service Manual

FRONT WHEEL AND BRAKE DISC
6 - 3
T700021

FRONT WHEEL INSPECTION

1.Inspect:
Front wheel axle
G
(by rolling it on a flat surface)
Bends → Replace.
WARNING
Do not attempt to straighten a bent axle.
Wheel axle bending limit:
0.25 mm
2.Inspect:
Front tire
G
Wear/damage → Replace.
Refer to the "TIRE INSPECTION" section in
CHAPTER 3.
Front wheel
G
Refer to the "WHEEL INSPECTION" section
in CHAPTER 3.
3.Check:
Spokes
G
Bends/damage → Replace.
Loose spokes → Retighten.
Turn the wheel and tap the spokes with a
screwdriver.
NOTE:
A tight spoke will emit a clear, ringing tone; a
loose spoke will sound flat.
4.Tighten:
Loose spokes
G
Nipple
G
NOTE:
Check the front wheel runout after tightening
the spokes.
CHAS