Brake Pad Replacement - Yamaha Scorpio Service Manual

FRONT BRAKE
CAUTION:
Disc brake components rarely require dis-
assembly. DO NOT:
Disassemble components unless abso-
G
lutely necessary;
Use solvents on internal brake compo-
G
nents;
Use spent brake fluid for cleaning; (use
G
only clean brake fluid)
Allow brake fluid to come in contact with
G
the eyes, as this may cause eye injury;
Splash brake fluid onto painted surfaces
G
or plastic parts, as this may cause dam-
age;
Disconnect any hydraulic connection, as
G
this would require the entire brake sys-
tem to be
cleaned, properly filled and bled after
reassembly.

BRAKE PAD REPLACEMENT

NOTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
1.Loosen:
Retaining bolts
G
2.Remove:
Brake caliper bolts
G
Brake caliper
G
3.Remove:
Retaining bolts 1
G
Brake pads 2
G
NOTE:
Install new brake pad springs when the
G
brake pads have to be replaced.
Replace the brake pads as a set if either is
G
found to be worn to the wear limit.
4.Measure:
Brake pad wear limit a
G
Out of specification → Replace the brake
pads as a set.
Brake pad wear limit:
0.8 mm
6 - 14
CHAS
disassembled, drained,