Front Fork Installation - Yamaha Scorpio Service Manual

FRONT FORK
Front fork leg oil level a (from
the top of the inner tube, with the
inner tube fully compressed and
without the fork spring):
95 mm
NOTE:
While filling the front fork leg, keep it upright.
G
After filling, slowly pump the front fork leg up
G
and down to distribute the fork oil.
Be sure to stroke the inner tube slowly
G
because the for oil may spurt out.
8.Install:
Spring 1
G
Spring seat 2
G
Spacer 3
G
Cap bolt 4
G
NOTE:
Install the spring with the smaller pitch facing
G
up.
Before installing the cap bolt, apply grease
G
onto the O-ring.
Temporarily tighten the cap bolt.
G
EAS00662

FRONT FORK INSTALLATION

The following procedure applies to both of the
front fork legs.
1.Install:
Front fork leg
G
Temporarily tighten the handle crown pinch
bolt and lower bracket pinch bolt.
NOTE:
Make sure that the inner fork tube is flush with
the top of the handlebar holder.
6 - 30
CHAS