Assembly - Yamaha Scorpio Service Manual

CARBURETOR

ASSEMBLY

To assemble the carburetor reverse the disas-
sembly procedures. Note the following points.
NOTE:
Before reassembling wash all parts in clean
G
gasoline.
Always use a new gasket.
G
1.Install:
Jet needle set
G
To piston valve assembly
NOTE:
Be sure to install the jet needle plate so that
the projection a is located toward the hole b
in the piston valve.
2.Install:
Pilot screw set 1
G
*****************************************************
Note the following installation points:
Screw in the pilot screw 4 until it is lightly
G
seated.
G
Back out by the specified number of turns.
Pilot screw (turn out):
2-1/2
*****************************************************
5 - 7
CARB