Crankcase Cover (Left) Installation - Yamaha Scorpio Service Manual

GENERATOR
2.Install:
Woodruff key 1
G
Generator rotor 2
G
Washer 3
G
Bolt 4
G
Use the sheave holder 5
Sheave holder:
90890-01701
NOTE:
Before installing the generator rotor, clean
G
the outside of the crankshaft and inside of
the generator rotor.
When installing the generator rotor, make
G
sure the woodruff key is properly seated in
the key way of the crankshaft.
NOTE:
Do not allow the special tool to touch the pro-
jection a on the generator rotor.
Nut (rotor):
60 Nm (6.0 m
CRANKCASE COVER (LEFT)
INSTALLATION
1.Install:
Stator coil 1
G
Pickup coil 2
G
Bolts (starter coil):
7 Nm (0.7 m
Screws (pickup coil):
7 Nm (0.7 m
2.Install:
Dowel pin
G
Gasket
New
G
4 - 40
ENG
kg)
•
kg)
•
kg)
•