Yamaha Scorpio Service Manual page 53

ENGINE OIL REPLACEMENT
5.If the oil filter element is also to be replaced,
perform the following procedure.
*****************************************************
Replacement steps:
Remove the oil filter element cover 1 and oil
G
filter element 2.
Check the O-rings 3 and replace them if
G
they are cracked or damaged.
G
Install the new oil filter element and the oil fil-
ter element cover.
È Outside
É Inside
*****************************************************
6.Check:
Engine oil drain bolt gasket
G
Oil filter element drain bolt gasket
G
Damage → Replace.
7.Install:
Engine oil drain bolt
G
(along with the gasket)
Oil filter element drain bolt
G
(along with he gasket)
8.Fill:
Crankcase
G
(With the specified amount of the recom-
mended engine oil)
9.Install:
Engine oil filler cap
G
3 - 11
INSP
ADJ
Oil filter element cover bolt:
10 Nm (1.0 m • kg)
20 Nm (2.0 m • kg)
10 Nm (1.0 m • kg)
Quantity:
Total amount:
1.4 L
Without oil filter element
replacement:
1.2 L
With oil filter element replace-
ment:
1.3 L