Transmission Inspection - Yamaha Scorpio Service Manual

TRANSMISSION
3.Inspect:
Shift fork "L" 1
G
Shift fork "C" 2
G
Shift fork "R" 3
G
Shift fork guide bar 4
G
Shift drum assembly 5
G
Pin 6
G
Roll the shift fork guide bar on a flat surface.
Bends → Replace.
WARNING
Do not attempt to straighten a bent shift
fork guide bar.
4.Check:
Shift fork movement
G
(along the shift fork guide bar)
Unsmooth operation → Replace the shift fork
and the shift fork guide bar.
NOTE:
When damaged the shift fork and mission
gear, replace the facing each gear as set.
EAS00424

TRANSMISSION INSPECTION

1.Measure:
Main axle runout
G
(with a centering device and dial gauge 1)
Out of specification → Replace the main
axle.
Main axle runout limit
0.08 mm
2.Measure:
Drive axle runout
G
(with a centering device and dial gauge 1)
Out of specification → Replace the drive
axle.
Drive axle runout limit
0.08 mm
4 - 65
ENG