Yamaha Scorpio Service Manual page 196

STEERING HEAD AND HANDLEBAR
6 - 38
2.Install:
Bearing (lower)
G
Onto the bearing race.
Lower bracket
G
WARNING
Support the lower bracket until it is
secured.
Bearing (upper)
G
Bearing race (upper)
G
Bearing race cover
G
Ring nuts
G
3.Tighten:
Ring nut
G
Refer to the "STEERING HEAD INSPEC-
TION" section in CHAPTER 3.
4.Install:
Holder
G
Pass the brake cable and wire harness
through the holder.
5.Install:
Front fork leg
G
Temporarily tighten the upper and lower
bracket pinch bolts.
6.Install:
Handle crown
G
Nut (steering stem):
110 Nm (11.0 m • kg)
7.Install:
Front fork
G
Refer to the "FRONT FORK" section.
Pinch bolt (lower bracket):
30 Nm (3.0 m • kg)
Pinch bolt (handle crown):
23 Nm (2.3 m • kg)
8.Install:
Front wheel
G
Refer to the "FRONT WHEEL AND BRAKE
DISC" section.
Nut (front wheel axle):
58 Nm (5.8 m • kg)
CHAS