Master Cylinder Removal; Master Cylinder Inspection - Yamaha Scorpio Service Manual

FRONT BRAKE
EAS00588

MASTER CYLINDER REMOVAL

NOTE:
Before removing the front brake master cylin-
der, drain the brake fluid from the entire brake
system.
1.Remove:
Brake lever/compression spring
G
Brake switch 1
G
2.Remove:
Union bolt 2
G
Copper washers
G
Brake hose 3
G
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the
end of the brake hose.
3.Remove:
Master cylinder holder
G
Brake master cylinder
G
EAS00592

MASTER CYLINDER INSPECTION

The following procedure applies to the both of
the brake master cylinders.
1.Check:
Brake master cylinder 1
G
Damage/scratches/wear → Replace.
Brake fluid delivery passages 2
G
(brake master cylinder body)
Obstruction → Blow out with compressed air.
2.Check:
Brake master cylinder kit 1
G
Damage/scratches/wear → Replace.
6 - 20
CHAS