Yamaha Scorpio Service Manual page 249

3.Flasher light and/or turn indicator light do not blink.
1.Bulb and bulb socket
Check the bulb and bulb socket for continu-
G
ity.
Refer to the "CHECKING OF BULBS" sec-
tion.
2.Turn signal switch
Check the turn signal switch for continuity.
G
Refer to the "CHECKING THE
SWITCHES" section.
3.Voltage
Connect the pocket tester (DC 20 V) to the
G
flasher relay.
Tester (+) lead → Brown 1 terminal
Tester (–) lead → Frame ground
Turn the main switch to "ON".
G
Check for voltage (12 V) on the "Brown"
G
lead at the flasher relay terminal.
CONTINUITY
CORRECT
MEETS SPECIFI-
CATION (12 V)
*
SIGNALING SYSTEM
NO CONTINUITY
Bulb and/or bulb socket are faulty, replace.
INCORRECT
Turn signal switch is faulty, replace handle-
bar switch (left).
OUT OF SPECIFICATION
Wiring circuit from main switch to flasher
relay connector is faulty, repair.
7 - 41
– +
ELEC