Yamaha Scorpio Service Manual page 197

STEERING HEAD AND HANDLEBAR
6 - 39
HANDLEBAR INSTALLATION
1.Install:
Speedometer assembly
G
Handlebar 1
G
Handlebar holders 2
G
Bolt cap 3
G
NOTE:
Punch mark 1 should be flush with upper
G
bracket when installing the handlebar.
Arrow marks 2 should be pointed toward
G
when installing handlebar holder.
Bolt (handlebar holder):
19 Nm (1.9 m • kg)
2.Install:
Clutch lever 1
G
Grip 2 (left)
G
Grip end 3 (left)
G
Handlebar switch 4 (left)
G
NOTE:
Align the handlebar switch projection with the
G
hole on the handlebar.
Apply lithium-soap base grease to clutch
G
cable end when installing left handlebar
switch.
3.Install:
Brake lever holder 1
G
Throttle grip 2 (right)
G
Throttle grip end 3
G
Handlebar switch 4 (right)
G
Throttle cable 5
G
NOTE:
Align the handlebar switch projection with the
G
hole on the handlebar.
Apply lithium-soap base grease to throttle
G
cable end when installing right handlebar
switch.
CHAS