Yamaha Scorpio Service Manual page 88

CYLINDER HEAD
NOTE:
TDC on compression stroke check:
Both rocker arms must have a valve clearance
G
when the "l" mark a on the flywheel is aligned
with the slit b on the crankcase cover.
If not, give the crankshaft one counter clock-
G
wise turn to meet above condition.
***********************************************
7.Loosen:
Bolt (camshaft sprocket) 1
G
NOTE:
Hold the crankshaft end with a wrench 2.
8.Remove:
Cam chain tensioner 1
G
9.Remove:
Camshaft sprocket
G
NOTE:
Fasten a safety wire to the cam chain.
10.Remove:
Engine mounting bracket
G
Refer to the "ENGINE REMOVAL" section.
11.Remove:
Cylinder head 1
G
NOTE:
Loosen the bolts in this stage, using a criss-
cross pattern.
4 - 11
ENG