Table of Contents
Advertisement
User Manual of Network Speed Dome
Chapter 6 Speed Dome Configuration
6.1 Configuring Network Settings
6.1.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the speed dome over
network. IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Network > Basic Settings > TCP/IP
2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet
Mask and IPv4(IPv6) Default Gateway.
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 6-1 TCP/IP Settings
Available from A1 Security Cameras
82
Advertisement
Table of Contents
