Thermal Optical Bi-spectrum Network Camera User Manual
It introduces the live view parameters, function icons and transmission parameters settings.
4.1 Live View Parameters
The supported functions vary depending on the model.
Note
For multichannel devices, select the desired channel first before live view settings.
4.1.1 Window Division
refers to 1 × 1 window division.
●
refers to 2 × 2 window division.
●
refers to 3 × 3 window division.
●
refers to 4 × 4 window division.
●
4.1.2 Live View Stream Type
Select the live view stream type according to your needs. For the detailed information about the
stream type selection, refer to Stream Type .
4.1.3 Enable and Disable Live View
This function is used to quickly enable or disable live view of all channels.
Click
to start live view of all channels.
●
Click
to stop live view of all channels.
●
Note
Go to Configuration → Local , to set Auto Start Live View, If Yes is selected, live view will start
automatically when you go to live view.
4.1.4 Start Digital Zoom
It helps to see a detailed information of any region in the image.
Steps
1. Click
to enable the digital zoom.
Chapter 4 Live View
18