Adjusting Touch Control Volume; Enjoying Stereo Audio In Video Calls - Polycom HDX Series User Manual

User's Guide for Polycom HDX Systems and the Polycom Touch Control

Adjusting Touch Control Volume

Enjoying Stereo Audio in Video Calls

14
Points to note about muting the microphone:
• Muting the microphone mutes audio coming from auxiliary audio inputs on
Polycom HDX 7000 series, Polycom HDX 8000 series, and Polycom HDX 9000
series.
• Muting the microphone does not mute audio coming from any device connected
to the VCR or content audio inputs.
• The red mute indicator on the front of the Polycom EagleEye View camera is lit
whenever the camera's built-in microphones are muted.
• The microphone might automatically mute when the system automatically
answers an incoming call.
You can adjust the volume levels of the Polycom Touch Control ring tone and
user alert tones.
To adjust the touch control volume:
From the Home screen touch
1
Select Touch Control tab if it is visible.
2
Use the Volume slider to adjust the Polycom Touch Control volume.
3
If your video conferencing room is configured to use stereo sound, the left and
right microphone inputs are configured during system setup. It is important
that you do not move the microphones as this might detract from the stereo
audio experience.
Stereo audio is only available in video calls of 256 kbps or higher.
User Settings.
Polycom, Inc.