To Disable Log Archiving; To Display Log Archiving Configuration And Status; To Display Log Archiving Error Details - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

3. Type the setarchiving enable command:
XSCF> setarchiving enable
After tests indicate the archive host is set up correctly, log archiving is enabled
effective immediately. If the tests fail, you receive an error message that log
archiving was not enabled, and the reason why.

▼ To Disable Log Archiving

1. Log in to the XSCF console with platadm privileges.
2. Type the setarchiving command:
XSCF> setarchiving disable
▼ To Display Log Archiving Configuration and
Status
1. Log in to the XSCF console with platadm, platop, or fieldeng privileges.
2. Type the showarchiving command:
XSCF> showarchiving

▼ To Display Log Archiving Error Details

1. Log in to the XSCF console with platadm, platop, or fieldeng privileges.
2. Type the showarchiving command:
XSCF> showarchiving -e
The details of the last ten archiving failures will be displayed.
Chapter 6 Log Archiving Facility 81