To Enable Processor Disable The Service Processprocessor Https Service - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

2. Type the showsnmp command:
XSCF> showsnmp
Command output example is:
XSCF> showsnmp
Agent Status:
Agent Port:
System Location:
System Contact:
System Description: Unknown
Trap Hosts:
Hostname
--------
host1
SNMP V1/V2c:
▼ To Enable or Disable the Service Processor
HTTPS Service
1. Log in to the XSCF console with platadm privileges.
2. Optionally, display the current status of the Service Processor HTTPS Service:
XSCF> showhttps
3. Type the sethttps command:
XSCF> sethttps -c function
where function is either enable or disable. The HTTPS service starts
immediately after being enabled, and stops immediately after being disabled.
For additional options with the sethttps command, including information on
certificates and private keys, see the sethttps(8) man page or to the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
44 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
Enabled
161
Unknown
Unknown
Port Type Community String Username Auth Protocol
---- ---- ---------------- -------- ------------
162 v3 n/a
None
user1 SHA