To Configure The Snmp Agent To Send Version 3 Traps To Hosts - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

2. Type the showsnmpvacm command:
XSCF> showsnmpvacm
Command output example is:
XSCF> showsnmpvacm
Groups
Groupname
=============
admin
Views
View
=============
all_view
Access
View
=============
all_view
▼ To Configure the SNMP Agent to Send Version 3
Traps to Hosts
1. Log in to the XSCF console with platadm privileges.
2. Type the setsnmp command:
XSCF> setsnmp addv3traphost -u username -r authentication_protocol {-n
engine_id | -i} [-a authentication_password] [-e encryption_password] [-p
trap_port] traphost
where username is a user known to the SNMP agent, authentication_protocol is
either MD5 or SHA, engine_id is the identifier of the local agent sending the trap,
which must match the engine_id expected by the host, -i asks for
acknowledgement from the receiving host, authentication_password is the
authentication password (must be equal to or greater than 8 characters),
42 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
Username
=============
jsmith, bob
Subtree Mask
======= ======
.1 ff
Group
=============
admin
Type
=========
include