To Display Usm Information For The Snmp Agent; To Create A Vacm Group; To Create A Vacm View - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

3. To verify the operation, type the showsnmpusm command.
▼ To Display USM Information for the SNMP
Agent
1. Log in to the XSCF console with platadm or platop privileges.
2. Type the showsnmpusm command:
XSCF> showsnmpusm
Command output example is:
XSCF> showsnmpusm
Username
=============
jsmith
sue

▼ To Create a VACM Group

1. Log in to the XSCF console with platadm privileges.
2. Type the setsnmpvacm command:
XSCF>
where
the name of the group to create for the specified user for view access.
3. To verify the operation, type the showsnmpvacm command.

▼ To Create a VACM View

1. Log in to the XSCF console with platadm privileges.
40 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
Auth Protocol
=============
SHA
MD5
creategroup -u username groupname
setsnmpvacm
is a valid user name known to the SNMP agent, and
username
is
groupname