Headroom Management; License Violations - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

Hide thumbs Also See for Sun SPARC Enterprise M3000:
Table of Contents

Advertisement

You can reserve COD licenses for specific domains by using the setcod command.
After power on, reserved licenses are first allocated to their domains, and then
remaining licenses are allocated on a first-come, first-served basis to the remaining
resources. When a domain is powered off, the reverse happens: first the unreserved
licenses are released to the pool, then the reserved licenses are released.
For example, assume your server had 10 COD licenses and you reserved them for
these domains:
PROC RTUs reserved for domain 0: 4
PROC RTUs reserved for domain 1: 2
PROC RTUs reserved for domain 2: 0
PROC RTUs reserved for domain 3: 0
When the domains were first powered on, four licenses would be assigned to
domain 0 and two licenses to domain 1. The remaining four licenses would be
available on a first-come, first-served basis to all four domains (0, 1, 2, and 3).

Headroom Management

Caution – Before using headroom, be sure to read and understand the relevant
topics in the SPARC Enterprise M4000/M5000/M8000/M9000 Capacity on Demand
(COD) User's Guide.
Headroom is the capability to use up to four COD processors per server before
entering the license information.
By default, COD resources arrive with headroom disabled. You can use the setcod
command to establish it. However, if all your COD resources are already licensed,
configuring headroom will have no effect. In that case, you need to install additional
COD boards to retain your headroom capacity. You can also reduce or disable
headroom at any time.
While headroom is in use, warning messages appear on the console every four
hours. Once you either deactivate the COD board or obtain a license for the
resources and enter the license keys, the warning messages stop. When a license key
is added, the headroom is automatically reduced by the quantity provided by the
license key.

License Violations

A license violation occurs if more resources are in use than are currently licensed on
the server. These events can cause a license violation:
Chapter 7
Capacity on Demand
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents