Sample Cfgadm Output; Entry-Level Server - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

Internal Devices and Device Paths on a High-end Server (Continued)
TABLE A-9
Uni- Quad-
*
PCIe Slot XSB XSB
IOU Slot 5 xx-0 xx-2
IOU Slot 6 xx-0 xx-3
IOU Slot 7 xx-0 xx-3
* xx is the XSB number, in the range of 00-15.
† xx is the XSB number, in the range of 00-15.
‡ x is LSB-dependent, and is assigned a value as shown in
** nn is the number associated with the PSB to which the CD-RW/DVD-RW drive or tape drive is attached, as follows: for an M8000 server,
nn is in the range of 0-3; for an M9000 server, nn is in the range of 0-7; for an M9000 server plus expansion unit, nn is in the range of 0-15.

Sample cfgadm Output

This section contains:
Sample output for the command cfgadm -s "select=class(pci)" on an
■
unpopulated server. As you connect devices, the cfgadm output will change to
reflect the device type and connection status on your server.
The device matrix for midrange and for high-end servers, when the IOU is
■
configured as part of a domain. I/O portions of the IOU resources may be in
different domains.

Entry-Level Server

The entry-level server does not support PCI hotplug. Therefore, the concepts of
attachment points and classes do not apply, and executing the command
cfgadm -s "select=class(pci)"
either would produce an error or display nothing.
OpenBoot PROM
PCIe Device OpenBoot PROM IOUA HBA On-board, IOU, and Platform Accessible
† ‡
Path Devices
x
pci@ 5,700000
x
pci@ 6,600000 .../pci@0,1/network@1 (IOUA HBA On-board BGE Port 0)
.../pci@0,1/network@1,1 (IOUA HBA On-board BGE Port 1)
.../pci@0/scsi@1/disk@4 (Platform CD-RW/DVD-RW at
cfgdevice port
.../pci@0/scsi@1/tape@5 (Platform tape at cfgdevice port nn-6;
x
pci@ 7,700000
TABLE A-2
**
nn-6; SCSI Target 4)
SCSI Target 5)
.
Appendix A Mapping Device Path Names 105