To Display Usage Statistics For Cod Resources - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

▼ To Display Usage Statistics for COD Resources

1. Log in to the XSCF console with platadm or platop privileges, or domainadm,
domainop, or domainmgr privileges for a specific domain.
2. Type the showcodusage command.
The output displays a summary of license usage by resource type and for each
domain. For example:
XSCF> showcodusage
Resource
--------
PROC
Domain/Resource
---------------
0
1
2
3
Unused - PROC
To display usage statistics only for domains or resources, use the
showcodusage -p domain command or the showcodusage -p resource
command. All COD usage information can be displayed with the
showcodusage -p all command.
You can also use the showboards command to identify which board is a COD
board. The output from this command has a column titled "COD". This column
contains an "n" for a non-COD board or a "y" for a COD board. For example:
XSCF> showboards -v -a
XSB
---
00-0
01-0
XSCF> showboards -v -a
XSB
---
00-0 * 00(00)
01-0 * 00(04)
94 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
In Use
------
0
In Use
------
- PROC
- PROC
- PROC
- PROC
R DID(LSB) Assignment
- -------- ----------
SP Unavailable n
SP Unavailable n
R DID(LSB) Assignment
- -------- ----------
Assigned
Assigned
Installed Licensed
--------- --------
4
Installed Reserved
--------- --------
0 4
0 0
0 0
0 0
0 0
Pwr Conn
--- ----
n
n
Pwr Conn
--- ----
n n
n n
Status
------
0 OK: 0 available
0
0
0
0
0
Conf Test Fault
---- ---- ----
n Unknown Normal n
n Fail Failed n
Conf Test Fault
---- ---- ----
n Unknown Normal y
n Unknown Normal y
COD
---
COD
---