To Increase Or Decrease Headroom; To Disable Headroom - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

▼ To Increase or Decrease Headroom

1. Log in to the XSCF console with platadm privileges.
2. Type the setcod command.
You can use one of two methods, as follows.
Use setcod command with the headroom option:
■
XSCF> setcod headroom
where headroom can be a number from 1 to 4. For example:
XSCF> setcod 4
Use the setcod command with no options.
■
If you are not sure of the headroom that is available, enter the setcod command
with no options; the output displays the number of available licenses and the
current headroom quantity (a number from 0 to 4).
XSCF> setcod
COD
---
PROC RTUs installed: 8
PROC Headroom Quantity (0 to disable, 4 MAX) [0]:4
WARNING: Using headroom requires you to install license key(s)
within 30 days.
You are prompted to enter the headroom number. Press Return when finished.
3. Verify the headroom quantity is correct by typing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
XSCF> showcod
Chassis HostID: 80d88800
PROC RTUs installed: 8
PROC Headroom Quantity: 4
...

▼ To Disable Headroom

1. Log in to the XSCF console with platadm privileges.
Do you agree? [y|n]: y
Chapter 7 Capacity on Demand 91