Solaris Os Procedures For Log Archiving; To Configure The Log Archive Host; Xscf Shell Procedures For Log Archiving; To Enable Log Archiving - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

Solaris OS Procedures for Log Archiving

▼ To Configure the Log Archive Host

1. Select a user account on the server that will be used as the archive host that the
Service Processor will use to log in.
2. Log in to the archive host and create an archive directory.
3. Set the permissions of the archive directory as desired. The Service Processor
log-in account must have read, write, and execute (rwx) permissions.
XSCF Shell Procedures for Log
Archiving
This section describes these tasks:

To Enable Log Archiving

■
To Disable Log Archiving
■
To Display Log Archiving Configuration and Status
■
To Display Log Archiving Error Details
■
▼ To Enable Log Archiving
1. Log in to the XSCF console with platadm privileges.
2. Type the setarchiving command:
XSCF> setarchiving -t user@host:directory -r
where user@host:directory is the user name, log archive host, and directory where
the logs are to be stored, and -r prompts for the password for ssh login. See the
setarchiving man page for additional options.
80 SPARC Enterprise Mx000 Servers Administration Guide • August 2009