Audit File Tools; Xscf Shell Procedures For Auditing; To Enable Or Disable Writing Of Audit Records To The Audit Trail; To Configure An Auditing Policy - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

Audit File Tools

You can manage audit files from the Service Processor, using a tool for viewing audit
files. See the viewaudit(8) man page for details on this tool.

XSCF Shell Procedures for Auditing

This section describes these tasks:

To Enable or Disable Writing of Audit Records to the Audit Trail

■

To Configure an Auditing Policy

■
To Display Whether Auditing is Enabled Or Disabled
■
To Display Current Auditing Policy, Classes, or Events
■
▼ To Enable or Disable Writing of Audit Records
to the Audit Trail
1. Log in to the XSCF console with auditadm privileges.
2. Type the setaudit command:
XSCF> setaudit enable|disable
where enable enables writing of audit records, and disable disables writing of
audit records.
▼ To Configure an Auditing Policy
1. Log in to the XSCF console with auditadm privileges.
2. Type the setaudit command:
XSCF> setaudit [-p count|suspend] [-m mailaddr] [-a users=
enable|disable|default] [-c classes={enable|disable}] [-e events=
enable|disable] [-g {enable|disable}] [-t percents]
See the setaudit(8) man page for details on option information.
74 SPARC Enterprise Mx000 Servers Administration Guide • August 2009