To Set The Service Processor Host Name And Dns Domain Name; To Set The Service Processor's Dns Name Server - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

▼ To Set the Service Processor Host Name and
DNS Domain Name
1. Log in to the XSCF console with platadm privileges.
2. Type the sethostname command:
a. To set the Service Processor host name:
XSCF> sethostname xscfu hostname
where xscfu can be xscf#0 (XSCF Unit 0) or xscf#1 (XSCF Unit 1 in a high-
end server); hostname is the host name to be set for the specified Service
Processor (XSCF Unit).
b. To set the Service Processor domain name:
XSCF> sethostname -d domainname
3. To verify the operation, type the showhostname command.
XSCF> showhostname -a | xscfu
where -a displays the host names for all XSCF Units, and xscfu displays
information for a specific XSCF Unit, either xscf#0 or xscf#1.

▼ To Set the Service Processor's DNS Name Server

1. Log in to the XSCF console with platadm privileges.
2. Type the setnameserver command, followed by one or more IP addresses
separated by a comma:
XSCF> setnameserver ip_address
3. To verify the operation, type the shownameserver command.
XSCF> shownameserver
Chapter 3 System Configuration 35