To Display System Board Status; To Access A Domain From The Xscf Console; To Attach A Cd-Rw/Dvd-Rw Drive Or Tape Drive While The Solaris Os Is Running On A High-End Server - Sun Microsystems Sun SPARC Enterprise M3000 Administration Manual

3. Verify the domain is powered on by opening a console to it, with the console
command.
See

▼ To Display System Board Status

1. Log in to the XSCF console with platadm, platop, or fieldeng privileges or
domainadm, domainmgr, or domainop privileges for a specific domain.
2. Type the showboards command:
XSCF> showboards -a

▼ To Access a Domain From the XSCF Console

1. Log in to the XSCF console with platadm, platop, or useradm privileges or
domainadm, domainmgr, or domainop privileges for a specific domain.
2. Type the console command:
XSCF> console -d domain_id
where domain_id is the domain you want to access. This command supports both
interactive and read-only connections; the default is a read-write connection.
3. To return to the XSCF console, press the Enter key, then the escape character,
then type ".". By default, the escape character is "#".
% #.
XSCF>
▼ To Attach a CD-RW/DVD-RW Drive or Tape
Drive While the Solaris OS Is Running on a
High-End Server
1. If the volume management daemon (vold) is running, stop the daemon:
# /etc/init.d/volmgt stop
2. Log in to the XSCF console with platadm privileges.
68 SPARC Enterprise Mx000 Servers Administration Guide • August 2009
"To Access a Domain From the XSCF Console" on page 68.