Table of Contents
Advertisement
Damage due to incorrect connection!
Accessory components and the power source itself can be damaged by incorrect
connection!
•
Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
•
Comprehensive descriptions can be found in the operating instructions for the relevant
accessory components.
•
Accessory components are detected automatically after the power source is switched on.
Using protective dust caps!
Protective dust caps protect the connection sockets and therefore the machine against
dirt and damage.
•
The protective dust cap must be fitted if there is no accessory component being operated
on that connection.
•
The cap must be replaced if faulty or if lost!
5.2
Installation
Risk of accident due to improper transport of machines that may not be lifted!
Do not lift or suspend the machine! The machine can fall down and cause injuries! The
handles and brackets are suitable for transport by hand only!
•
The machine may not be lifted by crane or suspended!
Installation site!
The machine must not be operated in the open air and must only be set up and
operated on a suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient
lighting for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
Damage to the machine due to improper transport!
The machine can be damaged by tensile or lateral forces if it is set
down or picked up in a non-vertical position!
•
Do not drag the machine horizontally on the machine feet!
•
Always pick up the machine vertically and set it down carefully.
099-005183-EW501
17.12.2010
CAUTION
WARNING
CAUTION
CAUTION
Design and function
Installation
25
Hide quick links:
Advertisement
Table of Contents
