5.12
Protecting welding parameters from unauthorised access
To protect against unauthorised or unintentional adjustment of the welding parameters on the machine,
the control input can be locked with the aid of a key switch.
In key switch position 1 all functions and parameters can be set without restriction.
In key switch position 0 the following functions and parameters cannot be changed:
•
Job switching function, welding task selection
(block job mode possible with Power-control torch)
•
Job Manager mode
•
Program Steps mode
•
Program A mode
•
Job Info mode
•
Super pulse function
Key switch, factory-fit option
You can order the key switch as factory-fit option when placing your machine order. The key
switch is not available as retrofit option!
099-005183-EW501
17.12.2010
Design and function
Protecting welding parameters from unauthorised access
NOTE
95