Table of Contents
Advertisement
Obligations of the operator!
The respective national directives and laws must be observed for operation of the
machine!
•
National implementation of the framework directive (89/391/EWG), as well as the associated
individual directives.
•
In particular, directive (89/655/EWG), on the minimum regulations for safety and health
protection when staff members use equipment during work.
•
The regulations regarding work safety and accident prevention for the respective country.
•
Setting up and operating the machine according to IEC 60974-9.
•
Check at regular intervals that users are working in a safety-conscious way.
•
Regular checks of the machine according to IEC 60974-4.
Damage due to the use of non-genuine parts!
The manufacturer's warranty becomes void if non-genuine parts are used!
•
Only use system components and options (power sources, welding torches, electrode
holders, remote controls, spare parts and replacement parts, etc.) from our range of
products!
•
Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
Electromagnetic interference!
The machines are intended to be used in industrial areas, according to IEC 60974-10. If
they are used in residential areas, for example, problems may occur with ensuring
electromagnetic compatibility.
•
Check whether interference is caused to other machines!
099-005183-EW501
17.12.2010
CAUTION
Safety instructions
General
11
Hide quick links:
Advertisement
Table of Contents
