Visonic PowerMaster-10 G2 Quick User Manual page 45

Notes:
1. GPRS cannot be enabled in UL Listed product.
2. SMS is a supplementary feature.
The "04.COMMUNICATION" menu contains several sub-menu options, each covering a group of configurable features
and parameters related to the communication and reporting as follows (see detailed list in Step 3 of the chart below):
Option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S.REPORTING
4:PRIVATE REPORT
5:MOTION CAMERA
6:UP/DOWNLOAD
1, 2
7:BROADBAND
To enter the "04.COMMUNICATION" menu and to select and configure an option, proceed as follows:
Step 1
Select "COMMUNICATION"
INSTALLER MODE
04.COMMUNICATION
1
Broadband is not applicable for UL installations
2
The name of the product is PowerLink3 IP Communicator
D-304762 PowerMaster-10/30 G2 Installer's Guide
Description of Option Features and Parameters
Contains configurable features and parameters related to the PSTN telephone line
to which the PowerMaster is connected.
Contains configurable features and parameters related to the Cellular connection
of the PowerMaster system.
Contains configurable features and parameters related to Reporting of event
messages to Monitoring Stations via telephone, cellular or IP broadband
communication.
Contains configurable features and parameters related to Reporting event
messages to Private Users via telephone or SMS.
Contains configurable features and parameters related to Motion Cameras for
Video Alarm Verification and forwarding of image clips to the Monitoring Station
and other remote subscribers via e-mail and/or MMS network.
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
Contains DHCP Client settings, enables to enter LAN parameters and reset
broadband module/settings.
Step 2
Select Communication
Sub-menu option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S. REPORTING
( ) These options
are available only to
the "Master Installer"
4:PRIVATE REPORT
Step 3
Select the "Communication" Parameter you wish to configure
AREA CODE SKIP
LINE PREFIX
DIAL METHOD
GPRS REPORT
GSM REPORT
SMS REPORT
GPRS APN
GPRS USERNAME
SIM PIN CODE
01:REPORT EVENTS
st
02:1 RPRT CHAN
nd
03:2 RPRT CHAN
rd
04:3 RPRT CHAN
05:DUAL REPORT
11:RCVR1 ACCOUNT
12:RCVR2 ACCOUNT
16:PSTN/GSM RCV1
17:PSTN/GSM RCV2
21:IP RCVR 1
22:IP RCVR 2
26:SMS RCVR 1
27:SMS RCVR 2
41:PSTN FORMAT
VOICE REPORT
→ → → → REPORTED EVENTS
1st private tel #
→ → → →
2nd private tel #
→ → → →
5. PROGRAMMING
GPRS PASSWORD
NETWORK ROAMING
GPRS ALWAYS ON
GSM KEEP ALIVE
TRANS. PROTOCOL
46:PSTN RETRIES
47:GSM RETRIES
51:TEL AUTO TEST
52:AUTO-TST TIME
53:COM.FAIL RPRT
→ → → → PSTN FAIL
→ → → → GSM/GPRS FAIL
61:CONFIRM ALARM
62:RECENT CLOSE
63:ZONE RESTORE
64:SYST.INACTIVE
65:TWO WAY VOICE
66:24H ZONE RPRT
SMS REPORT
→ → → → REPORTED EVENTS
1st SMS tel #
→ → → →
2nd SMS tel #
→ → → →
Section
5.6.2
5.6.3
5.6.4
5.6.5
5.6.6
5.6.7
5.6.8
Step 4
See
5.6.2
5.6.3
5.6.4
5.6.5
See
also
User's
45