Table of Contents
Advertisement
The picture above shows the HDMI input settings. You are able to check and set
the same parameters here that are described in detail in section 5.7.1. The settings
can be applied to all inputs or to the selected input. The selection can be made on
the top; the selected input is marked red. You also have the opportunity to reload
the factory default settings to one or to all inputs.
If you made any changes in the "Settings" box, the new settings will have an effect
immediately.
By selecting HDMI Output settings, another screen appears (shown below). All
parameters can be accessed here that are described in section 5.7.2 including the
general port status, video and audio signal info and the capabilities of the attached
display device.
New settings and factory defaults can be applied either to all outputs or to one
output just like the input settings. The detailed description of each output setting
can be found on page 80.
Page 84 / 109
Advertisement
Table of Contents
