Table of Contents
Advertisement
MX32x32DVI-HDCP-Pro and HDMI-Pro
User's Manual v1.0
Click "UPGRADE SELECTED FIRMWARES" button. The router is being
reprogrammed with the selected firmware after clicking on "YES" button. If you
select a file that does not fit for the selected controller, you will get an information
message about which file is wrong. If you selected a controller to upgrade, but you
had not selected a file for it, then you will also get an information message about
which file is missing.
Quick Bootload mode can be switched on or off any time. It makes the bootloader
software faster by only checking the checksum of the controller. No data
verification is done after writing if the checksum was correct.
Info:
The reprogramming time will vary between 3-8 mins per controller.
Page 95/ 109
Advertisement
Table of Contents
