Table of Contents
Advertisement
6.6.
The unit's network values are displayed when you select Configuration->Network
Settings.
The following sections describe the configurable parameters on the Network
Settings page.
Info:
Most of these settings are also available from the front panel. See page 34 for
more details.
6.6.1. Assign IP address automatically
The matrix switcher supports three of the most commonly used automatic IP
configuration protocols.
Step 1
Step 2
Step 3
Step 4
BOOTP
DHCP
AutoIP
Info:
Disabling BOOTP, DHCP, and AutoIP (all three checkboxes) is not advised as the
only available IP assignment method will then be ARP or serial port.
When you are finished, click Apply Settings button
Info:
To continue using the Web Manager, you must type the new IP address in the
browser.
Network Configuration
Click on Configuration menu
Select Network Settings
Select Obtain IP address automatically
Enter the following (as necessary):
MX32x32DVI-HDCP-Pro and HDMI-Pro
Select Enable to permit the Bootstrap Protocol
(BOOTP) server to assign the IP address from
a pool of addresses automatically.
Select Enable to permit the Dynamic Host
Configuration Protocol (DHCP) server to
assign leased IP address to the matrix unit
automatically.
Select Enable to permit the matrix to generate
an IP in the 169.254.x.x address range with
Class B subnet.
User's Manual v1.0
Page 87/ 109
Advertisement
Table of Contents
