Lightware MX32x32HDMI-Pro User Manual page 35

Power status
Internal 3.3V supply
You are able to check here the DC voltages and the internal temperature. If these
values are out of the safe interval, you will get a warn message on the LCD screen
regardless of what menu is selected.
Cards ID slot
This submenu shows the hardware description strings of the installed cards. You
can view the installed cards by pressing UP and DOWN buttons. The position is
shown in the top right corner. The possible values are:
MB
I1, I2, I3, I4
O1, O2, O3, O4
Firmwares
It shows the firmware version numbers of the CPU, EDID, web server, web content
and the front panel control board(s). Press the UP and DOWN buttons to view the
desired firmware.
Factory resets
Here you are able to recover the original factory settings if something went wrong.
There are more factory reset options that you can select:
IP reset
IO Card reset
HDCP reset
MX32x32DVI-HDCP-Pro and HDMI-Pro
Internal 5.0V supply
Card name and version
Motherboard
Input card slots
Output card slots
Firmware version
It resets the IP settings to factory default.
(192.168.254.254:10001, mask:255.255.0.0, no gateway)
Resets all settings related to the IO cards except the
EDID routings.
Resets the internal HDCP key cache. It is useful when a
source device fails because of too many downstream
connections.
User's Manual v1.0
Internal temperature
Position (MB, I1-I4, O1-O4)
Name
Page 35/ 109