Configuring Osd Text Overlays; Configuring Picture Overlays; Configuring Regions Of Interest - Honeywell HDZ302D User Manual

Configuring OSD Text Overlays

You can configure other text overlays
on the Setup > Compression Setup >
Overlay > OSD Information page.
To display preset, temperature, PTZ
coordinates, zoom magnification,
and/or direction information, click the
corresponding Enable button(s).
To display custom text, next to Text
Overlay, click Enable, and then enter
the desired text in the Input Text field.
Set Text Alignment to Left or Right.
To move the text overlay, drag the
yellow OSD Information box to the
desired location in the preview window.
Click Save to apply the settings.

Configuring Picture Overlays

You can configure picture overlay
properties on the Setup > Compression
Setup > Overlay > Picture Overlay page.
To display a picture overlay, click
Enable, click Upload Picture, upload
the picture, and then click Save. The file
must be in BMP format, less than 16 KB,
and no more than 128×128 pixels.
To move the picture overlay, drag the
yellow frame to the desired location in
the preview window, and then click Save.

Configuring Regions of Interest

You can configure regions of interest (ROI) on the Setup > Compression Setup > ROI page.
To enable the ROI function, click Enable.
In the preview window, drag your mouse over the portion of the scene that you want to
designate as a region of interest, select an Image Quality level between 1 (lowest) and 6
(highest), and then click Save. You can add up to 8 regions of interest.
To delete a single region of interest, select it, and then click Delete. To delete all regions of
interest, click Remove All.
Configuring Video and Audio Settings | 49
800-22456 - A - 04/2017