Configuring Osd Settings - Honeywell HEIPTZ-2736-WI User Manual

User Manual of Explosion-Proof PTZ Camera
Video Adjustment
The functions vary depending on different Explosion-Proof PTZ Camera models.

Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror.
The flip direction can be set to OFF or CENTER.

Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system in
your country.

Capture Mode
You can disable this function or select the capture mode from the list.
Other
The functions vary depending on different Explosion-Proof PTZ Camera models.

Lens Initialization
The lens operates the movements for initialization when you enable Lens Initialization.

Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be selected
from the list.
6.3.2 Configuring OSD Setting
Purpose:
The Explosion-Proof PTZ Camera supports following on screen displays:
Time: Supports for time display.
Name: Identifies the name of Explosion-Proof PTZ Camera.
You can customize the on screen display of time.
Steps:
1. Enter the OSD settings interface:
Configuration > Image > OSD Settings
Figure 6-35 Electronic Image Stabilization
s
87