Navigating Osd Menus; Sending The Dome To A Preset - Honeywell ACUIX User Manual

Navigating OSD Menus

Sending the Dome to a Preset

Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
You can navigate through the menu options displayed on the monitor using the
following controller commands:
• To navigate vertically through the menu options, move the controller joystick
up or down.
• To select a menu option, or to toggle between settings, press Iris Open (Iris+).
To exit a menu and return to the previous screen, press Iris Close (Iris −).
•
A preset is a memorized dome function that can be recalled manually by the
operator.
• To go to a preset using the UltraKey Touch controller, press View, type preset
number, and then press Enter.
• To go to a preset using the HJZTP controller, type preset number, and then
press Preset.
13