PERIODIC MAINTENANCE
QUASAR 50-100
Outlined in this section are the recommended procedures for the periodic maintenance of the key components of the motorcycle.
Before proceeding to maintain or inspect the motorcycle, stop the engine and remove the ignition switch key. Ensure
that the engine and exhaust system have cooled down. Wherever possible, place the motorcycle on firm and level
ground and lift it using suitable equipment. Be careful of any parts of the engine or exhaust system which may still be
hot to the touch to avoid scalds or burns.
All component parts of the vehicle are inedible. Do not bite, suck, chew or swallow any vehicle parts. If not expressly
indicated otherwise, for the reassembly of the units repeat the disassembly operations in reverse order.
2.1
PERIODIC MAINTENANCE CHART
In order to preserve the motorcycle in sleek running order, aprilia recommends that you strictly observe the periodic
maintenance intervals recommended for the different component parts.
2
- 3 -
00
Release 00/2003 - 06