Color Registration; Initialize Nvm; Initialize Print Meter - Fuji Xerox DocuPrint CM405 df User Manual

• Color Registration

Purpose:
To manually perform color registration adjustment.
manual color registration adjustments are required when the printer is initially installed and after the printer is
moved.
NOTE:
• The Color Registration feature can be configured when Auto Registration is set to Off.
Values:
Auto
Registration
Print
Registration
Chart
Enter
Registration
Values
NOTE:
• Ensure that you remove the paper from the bypass tray before performing Auto Registration.

• Initialize NVM

Purpose:
To initialize the non-volatile (NV) memory for system parameters, Address Book data for fax, or Address Book data
for scan. After executing this function and rebooting the printer, the menu parameters or data, except the parameters
for the network, are reset to their factory default values.
Values:
Fax Settings Initialize
Scan Initialize
Settings
System Initialize
Settings

• Initialize Print Meter

Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Value:
Initialize
324
Using the Operator Panel Menus and Keypad
Start Automatically performs color registration correction.
Print Prints a color registration chart. The color registration chart prints a
lattice pattern of yellow, magenta, and cyan lines. On the chart, find the
values on the right side that are next to the line that is perfectly straight
for each of the three colors. If the value for this line is 0, color registration
adjustment is not required.
If the value for this line is any value other than 0, specify the adjustment
values under lateral adjustment and process adjustment in Enter
Registration values.
LY -9 to +9
LM
LC
RY -9 to +9
RM
RC
PY -9 to +9
PM
PC
Initializes the fax number entries in the Address Book.
Initializes the e-mail and server address entries in the Address
Book.
Initializes the system parameters.
Initializes the print meter.
Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction)
color adjustment values individually for yellow,
magenta, and cyan. Enter a number in order of
lateral adjustment (left), lateral adjustment
(right), and process adjustment. Select OK to
save all the settings.