Fuji Xerox DocuPrint CM405 df User Manual page 136

Operator Panel
Auto SSID Setup
1
Press the (System) button.
2
Select Tools tab.
3
Select Admin Settings.
4
Select Network.
5
Select Wireless.
6
Select Wireless Setup Wizard.
The printer automatically searches the access points on wireless network.
7
Select the desired access point.
If the desired access point does not appear, see
NOTE:
• Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
8
Select Next.
9
Enter the WEP key or pass phrase.
When the encryption method of the selected access point is WEP in step 7:
Select the Enter Key text box, and then enter the WEP key.
a
Select OK.
b
When the encryption method of the selected access point is WPA, WPA2 or Mixed in step 7:
Select the Enter Password text box, and then enter the pass phrase.
a
Select OK.
b
The Restart System message appears.
10
Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.
IMPORTANT:
• If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
136
Printer Connection and Software Installation
"Manual SSID Setup" on page 137.