Installing The Optional Wireless Printer Adapter; Verifying The Contents Of The Box - Fuji Xerox DocuPrint CM405 df User Manual

Installing the Optional Wireless Printer Adapter

The wireless printer adapter allows you to use the printer with wireless network connection.
The specifications of the wireless printer adapter are described below.
Item
Connectivity Technology
Compliant Standards
Bandwidth
Data Transfer Rate
Security
®
Wi-Fi Protected Setup (WPS)*:
*:WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2-PSK AES,
WPA-PSK TKIP, Open (No Security)
NOTE:
• WPA-Enterprise (TKIP, AES) and WPA2-Enterprise (AES) are available when the optional hard disk unit is installed.
• When the wireless printer adapter is installed, you cannot use IEEE 802.1x authentication and/or the Ethernet port for a wired
connection.

Verifying the Contents of the Box

Wireless Printer Adapter
Installation Guide
Wireless
Printer Adapter
NOTE:
• To complete wireless installation, you require the corresponding Driver CD Kit that comes with your printer, which can also be
downloaded from http://www.fujixerox.com/support/docuprint/.
68
Basic Operation
Specification
Wireless
IEEE 802.11b, 802.11g, and 802.11n
2.4 GHz
IEEE 802.11n: 65 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
64 (40-bit key)/128 (104-bit key) WEP,
WPA- PSK (TKIP, AES), WPA2-PSK (AES), WPA-Enterprise (TKIP, AES),
WPA2-Enterprise (AES)
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
Wireless Network Kit b/g/n Installation Guide
Thank you for purchasing the Wireless Network Kit b/g/n.
To ensure the safe operation of the printer, be sure to read through the "Safety Guide" before starting
the installation. For more details such as how to configure the wireless settings for the printer, refer to
"Configuring Wireless Settings (Windows & Mac OS X)" in "User Guide" available on the Driver CD Kit.
Installing the Wireless Printer Adapter
Important
• Ensure that the printer is turned off before installing the wireless printer adapter.
Align the connector and the three protrusions of the wireless printer adapter with the four holes on the rear of the
printer, and insert the adapter as shown in the illustration.
•
•
XXXX XXXXX / DE4942Z4-1
(Edition 1) June 2012
Printed in China
Copyright © 2012 by Fuji Xerox Co., Ltd. XXXX XXXXX
Fuji Xerox Co., Ltd.