Edge Erase - Fuji Xerox DocuPrint CM405 df User Manual

Edge Erase

To specify the top and bottom margins of the copy.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
1
Select the Output tab.
2
Select until Edge Erase appears, and then select Edge Erase.
3
Select or , or use the number pad to enter the desired value.
Top / Bottom
Left / Right
Middle
4 mm* (0.2 inch*) Specify the value in increments of 0.1 inch (1 mm).
0→50 mm (0.0→2.0")
4 mm* (0.2 inch*) Specify the value in increments of 0.1 inch (1 mm).
0→50 mm (0→2.0")
0 mm* (0 inch*) Specify the value in increments of 0.1 inch (1 mm).
0→50 mm (0→2.0")
209
Copying