Output Color; Select Tray; Lighten / Darken - Fuji Xerox DocuPrint CM405 df User Manual

Output Color

To select the mode for color or black and white copying.
1
Select Output Color.
2
Select Full Color or Black & White, and then select OK.
NOTE:
• Color copy is secured with a passcode if the Service Lock setting for
Output Color
If you set
Locked) , you will need to enter the four digit passcode after pressing the

Select Tray

To select a tray.
1
Select Select Tray.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Bypass Tray
Tray 1*
Tray 2
NOTE:
• Tray 2 is only available when the optional 550 sheet feeder is installed.
• When Any is displayed as the paper size and type in the bypass tray, you can select the paper size and type from this
menu.

Lighten / Darken

To adjust the contrast to make the copy lighter or darker than the original.
1
Select Lighten / Darken.
2
Select the desired level on the Lighten / Darken bar, and then select OK.
You can select a contrast level from seven levels between Darken and Lighten.
Selecting a cell on the left side of the bar makes the document contrast darker, and selecting a cell on the right
side of the bar makes the document contrast lighter.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Darken +3
Darken +2
Darken +1
Normal*
Lighten +1
Lighten +2
Lighten +3
Full Color
to and the Service Lock setting for
The paper is fed from the bypass tray.
The paper is fed from the standard 550 sheet tray.
The paper is fed from the optional 550 sheet feeder.
Works well with light documents or faint pencil markings.
Works well with normal typed or printed documents.
Works well with dark documents.
On (Color Password Locked)
Copy
is set to
On (Color Password
Copy
to
(Start) button.
.
203
Copying