Print Quality Problems - Fuji Xerox DocuPrint CM405 df User Manual

Print Quality Problems

This section includes:
• "The Output Is Too Light" on page 380
• "Toner Smears or Print Comes Off" on page 381
• "Random Spots/Blurred Images" on page 382
• "The Entire Output Is Blank" on page 383
• "Streaks Appear on the Output" on page 384
• "Part or the Entire Output Is Black" on page 384
• "Pitched Color Dots" on page 385
• "Vertical Blanks" on page 386
• "Mottle" on page 386
• "Ghosting" on page 387
• "Light-Induced Fatigue" on page 387
• "Fog" on page 388
• "Bead-Carry-Out (BCO)" on page 388
• "Jagged Characters" on page 389
• "Banding" on page 390
• "Auger Mark" on page 390
• "Wrinkled/Stained Paper" on page 391
• "Damage on the Leading Edge of Paper" on page 392
• "The Top and Side Margins Are Incorrect" on page 392
• "Color Registration Is out of Alignment" on page 393
• "Protrudent/Bumpy Paper" on page 393
• "Images Are Skewed" on page 394
NOTE:
• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.
See also:
• "Understanding the Printer Menus" on page 290
• "CentreWare Internet Services" on page 85
Troubleshooting
379