Ghosting; Light-Induced Fatigue - Fuji Xerox DocuPrint CM405 df User Manual

Ghosting

Problem
The printed result has ghosting.

Light-Induced Fatigue

Problem
The printed result has
light-induced fatigue pattern.
Action
If the type of the ghosting is positive ghost:
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 436
• "Installing the Drum Cartridges" on page 439
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
If the type of the ghosting is negative ghost:
Verify that the print media recommended for the printer is being used.
If you are using non-recommended print media, use the print media recommended
for the printer.
If the problem is solved, adjust the transfer bias.
If the problem persists, replace the drum cartridges if you have spare cartridges.
Adjust the transfer bias.
1 On the operator panel, press the
and select Admin Settings → Maintenance → Adjust 2nd BTR.
2 Adjust the setting for the type of print media being used.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Action
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 436
• "Installing the Drum Cartridges" on page 439
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
(System) button and select the Tools tab
Troubleshooting
387